Skip to main content
S

Sigrid O'Kon

Feb 20, 2025

Calculate the hydronium ion concentration in an aqueous solution with a ph of 9.85 at 25°c.

Calculate the hydronium ion concentration in an aqueous solution with a ph of 9.85 at 25°c.

7 Answers

1.41 × 10⁻¹⁰ MExplanation:We have a solution with a pH of 9.85 at 25 °C. We can calculate the concentration of H⁺ using the following expression.pH = -log [H⁺] [H⁺] = antilog -pH[H⁺] = antilog -9.85[H⁺] = 1.41 × 10⁻¹⁰ MH⁺ is usually associated with water molecules forming hydronium ions.H⁺ + H₂O → H₃O⁺ Then, the concentration of H₃O⁺ ions is 1.41 × 10⁻¹⁰ M.... Show More
The hydronium ion concentration for a solution with pH 9.85 = 1.41 *10^-10MExplanation:Step 1: data givenpH = 9.85 Temperature = 25.0 °Cthe hydronium ion concentration = [H3O+] = [H+]Step 2: Calculate the hydronium ion concentration[H3O+] = [H+]pH = -log[H+] 9.85 = -log[H+][H+] = 10^-9.85 [H+] = 1.41 *10^-10M = [H3O+]The hydronium ion concentration for a solution with pH 9.85 = 1.41 *10^-10M... Show More
aExplanation:Givenand Also therefore Thus and As the pH is less than 7 therefore solution is acidic... Show More
Answer : The hydronium ion concentration in an aqueous solution is,  Explanation :  Given,pH = 9.85pH : It is defined as the negative logarithm of hydronium or hydrogen ion concentration.Formula used :Now put the value of pH in this formula, we get:Therefore, the hydronium ion concentration in an aqueous solution is,  ... Show More
Approximately . Explanation:The hydronium ion concentration of an aqueous solution can be found from its with the equation:.For this solution, . Hence,. Note that for this equation, the number of significant figures in should be the same as the number of decimal places in . For example, the of this question comes with only one decimal place. As a result, there would be only one significant figure in the obtained from the equation.... Show More
Answer is:  1.4 × 10-10 mpH = 9.85.[H₃O⁺] = 10∧(-9.85).[H₃O⁺] = 1.4·10⁻¹⁰ M.pH (potential ofhydrogen) is a numeric scale used to specify the acidity or basicity an aqueous solution.If pH is greater thanseven, solution is base and if pH is equal seven, solution is neutral and if pH of solution is less than seven, than is acidic.... Show More
We have been given the pOH value, then we can calculate the pH value.pH + pOH = 14pOH = 9.85 pH = 14 - 9.85 = 4.15We can calculate the hydronium ion concentration using pH valuepH = -log [H₃O⁺][H₃O⁺] = antilog(-pH)we can calculate antilog of pH by writing it as 10^(-4.15)[H₃O⁺] = antilog (-4.15)[H₃O⁺] = 7.07 x 10⁻⁵ M... Show More

Want to answer this question?

Join our community to share your knowledge!

Categories

Tags

Related Questions

7
Calculate the initial rate for the formation of c at 25 ∘c, if [a]=0.50m and [b]=0.075m.

Calculate the initial rate for the formation of c at 25 ∘c, if [a]=0.50m and [b]=0.075m.

1
Calculate the lattice energy of lithium oxide from the following data?

Enthalpy of sublimation of lithium: +159 kJ/molBond energy of oxygen: +498 kJ/molFirst ionization energy of lithium: +52...

1
Calculate the magnitude of the velocity of the rock just before it strikes the ground?

A man stands on the roof of a building of height 15.6m and throws a rock with a velocity of magnitude 31.1m/s at an angl...

3
Calculate the mass in grams of $700 billion worth of gold.?

In 2009, one of the U.S. government’s bailout packages was $700 billion when gold was worth $800 per ounce ($28.20 per g...

1
Calculate the mass of fluorine per gram of sulfur for the sample of sulfur hexafluoride.?

Sulfur and fluorine form several different compounds including sulfur hexafluoride and sulfur tetrafluoride. Decompositi...

1
Calculate the mass of silver chloride required to plate 225mg of pure silver.?

Silver chloride, often used in silver plating, contains 75.27%Ag .

2
Calculate the masses of oxygen and nitrogen that are dissolved in 6.0 L of aqueous solution in equilibrium…?

I’m having a little trouble with this chem. question… I took the partial pressures, then used those to find the molarity...

1
Calculate the max power in kW that can be produced using the standard enthalpy of the reaction?

An experimental spacecraft consumes a special fuel at a rate of 2.10 × 102 L/min. The density of the fuel is 0.690 g/mL...

3
Calculate the molality of the solution. (assume a density of 1.08 g/ml for the solution.)an aqueous nacl solution is made using 140

Calculate the molality of the solution. (assume a density of 1.08 g/ml for the solution.)an aqueous nacl solution is mad...