How do i put a password on my wifi?

Go to your wireless profile and select profile that you want to protect by password. Then select the properties of your profile and select network security or ENCRYPTION KEY(SSID) then type anything as your password. Then all are need to know the password for your profile connection.

option 1)-type 192.168.1.1 in your browser, go to WEP and add a password

option 2)- Both your wifi cards support WPA encryption, that’s good.

You will need to access the router control panel via a Web browser.

Do this from a computer that is connected to the router via wire, don’t use a wireless client to do this.

1. open browser

2. type http://192.168.1.1/

3. enter username and password:

Username: blank, don’t type anything here

Password: admin

Those are the defaults. If cannot access using admin as a password then you’ll need to reset the router using the reset button on the back. A pen works well for this. You’ll see the router led’s blinky-blink while it resets. After reset, login using the defaults above.

4. There will be a section for wireless setup and wireless security. Enable the wifi and use WPA TKIP security. You can also give a unique name (ESSID) to your wireless network. The default name is Linksys. Name it something like “getyourown” or “nolongerfree” if you want to have some fun w/ the neighbor!

Have a look at detailed instructions in the user manual available here:

http://www.linksys.com/servlet/Satel…=0034939789…

This Site Might Help You.

RE:

How do i put a password on my wifi?

How do i see the network screen to where it shows all the computers picking up off my wifi? I would like to secure this and put a password on or maybe block some computers from it. Help!

https://shorturl.im/PSnMD

Usually Router Password is used in Networks in office and multi-user/sharing in a home network. To avoid unauthorized login, follow the process. -Install Router drivers. -Go to browser and enter 192.168.1.1 (As default Internal IP) -Enter User name and a STRONG Password.(Don’t reveal password to any one else) -Login to the Admin panel with the default account as created and enable password protection. -Win XP can prompt for WPA/WPA2 (Wi-Fi Protected Access), which can be downloaded from Microsoft website. That’s it. Done!

naseem123